AuraDune · 奥若杜茵智能沙画
Connect AuraDune: Bluetooth and Wi-Fi
Connect by Bluetooth first, then finish Wi-Fi setup. Wi-Fi is essential for full control of AuraDune: Bluetooth is used for nearby pairing, Wi-Fi setup, and basic controls, and does not replace a Wi-Fi connection. For direct local control, your phone and AuraDune should be on the same Wi-Fi network. AuraDune connects to 2.4 GHz Wi-Fi. Internet access is required for Remote Access and online services; local Wi-Fi and internet access are different things.
Power on and prepare your phone
Connect AuraDune to its supplied power adapter and keep your phone close to the table. Turn on Bluetooth and Wi-Fi on your phone. Open the AuraDune app and allow Bluetooth and Local Network access when requested.
Pair using Bluetooth (BLE)
On the home screen, add a new physical device. Press and hold the pairing button on the back of AuraDune for 2 seconds, then release it. Tap Start pairing in the app, select your nearby AuraDune, and tap Pair. You can also use Scan device QR label if your device has a pairing label. Complete pairing inside the AuraDune app.
Choose a 2.4 GHz Wi-Fi network
After Bluetooth pairing, the app opens Configure WiFi. Connect your phone to the same home network you want to use with AuraDune. Select a nearby 2.4 GHz network, or enter its name (SSID) manually if it is hidden. AuraDune cannot join a 5 GHz-only network. Your phone may use another band on the same home network, provided the devices can communicate with each other.
Send the Wi-Fi details and finish setup
Enter the Wi-Fi password exactly, then tap Connect AuraDune. Leave the password blank only for an open network. Keep the table powered on and your phone nearby while the app sends the network settings over Bluetooth. Wait for setup to succeed, then tap Done. If you skipped Wi-Fi earlier, open the saved device’s connection settings and tap Configure WiFi.
Use Wi-Fi for full control
Keep AuraDune connected to Wi-Fi for normal use. The app automatically prefers Wi-Fi for full control. Pattern uploads, Live Draw, light playlists, and firmware updates require Wi-Fi and are not supported by Bluetooth alone. Seeing Bluetooth connected only means the nearby Bluetooth link is available; finish Wi-Fi setup before expecting all controls to work.
Reconnect for everyday use
Open your saved AuraDune while your phone is on the same local Wi-Fi network. The app reconnects automatically when the device is reachable. If you want control away from home, sign in and enable Remote Access in the device settings while connected directly to the table. For Remote Access, AuraDune must stay connected to Wi-Fi with internet access.
If the connection does not work
For Bluetooth: check that the table is powered on, Bluetooth permission is allowed, and the phone is nearby; then repeat the 2-second pairing-button step and scan again. For Wi-Fi: check the network name and password, use a 2.4 GHz network, and move the table closer to the router. Allow Local Network access on your phone. If Bluetooth is connected but full controls are unavailable, open Configure WiFi and complete or retry setup. For direct local control, avoid guest networks or router isolation settings that prevent your phone from reaching AuraDune.
More setup and support →